Terminal Block for Tealware High Density Digital Modules:
The XDC20-TB is a DIN-rail mount Screw Terminal module to accept field wiring. It connects to 32 point Tealware Digital I/O modules via an HDIO-CBL cable to its DB37 female connector.
Features:
- Screw-clamp terminal blocks allow easy and reliable connections
- Case dimensions (W x L x H): 77 x 114 x 51 mm (3.2″ x 4.5″ x 2.0″)
The XDC20-TB can be used with the Tealware modules in the table below.
| Module | Description |
| 32 channel 12/24VDC Input Module | |
| 32 channel 12/24VDC Output Module, PNP/Source | |
| 32 channel 12/24VDC Output Module, NPN/Sink |
About Tealware I/O
Tealware modules mount into a backplane. Configuration options include high speed local I/O or ModbusTCP Ethernet I/O configurations:
- Up to (3) modules can be mounted directly to a Smart SoftPLC or Smart Adapter equipped with a Backplane-3 interface
- An I/O Base (IOBASE08) can hold any mix of up to (8) modules plus a Tealware Power Supply Module (PWS11 or PWS20C), and connect via an Expansion I/O Cable to a Smart SoftPLC or Smart Adapter equipped with a Local Ports interface
Common features to all Tealware modules make your control system robust, and simplify installation and maintenance:
- Detachable front-end terminal block/cable for easy module replacement without re-wiring
- Front Panel LED display for status monitoring/troubleshooting
- High noise immunity
- Automatic Configuration – Module addressing based on location (not DIP switch) for easy system configuration & maintenance (manual configuration option also available)
